Compact decoiler Straightener and Servo Feeders coil press feeding systems for Schneider Electric Light Cable Tray stamping
Coil Feeding Lines with compact design are preferred to be used in case of only small available space as well as in case of less delicate coil material with big material square. They normally are used at middle-sized feeding lengths and middle-sized number of press strokes per minute.Coil Feeding Lines are composed of a Decoiler Straightener unit and NC Servo Feeder unit and are particular suitable for profiling, stamping punching line, laser cutting and many other machining processes.
By combination of straightener and roll feed into one machine, so called feeder-straightener, which is positioned directly at the press, the needed space for a (very often long) material loop of straightened material can be saved..
The feeder-straightener is supplied with material out of a (in comparison) very small loop of not straightened material below the Decoiler.
The decoiler is equipped with a variable speed drive as well as with a very sensitive loop control. By this way it is assured that there always will be enough material available for supply of the feeder-straightener.
In case that feeding lengths and stroke rates do require a bigger material stock within the material loop, the Coil Feeding Line will be completed with a loop pit.The flexibility that can be applied to these coil feeding lines makes it possible to study the best solution on the basis of the customers` specific working needs, depending on the sectors to which they belong and the use of the material itself.
Coil Feeding lines are therefore able to work thickness from 0.6 mm to 6.0 mm with width that range from 70 to 1800mm and weight up to 10tons depending on the needs of the specific customer.
Various kinds of materials can be machined, from soft ones such as aluminium and alloys, to hot and cold-rolled materials and carbon and stainless steel, and to high-strength materials and lamination steel.
The future of compact press feed line
Suitable Material: CR Steel, HR Steel, Stainless, Aluminum, Copper etc.
Coil width: 70mm-1800mm
Material thickness: 0.6mm-6.0mm
Coil weight: Max.20Tons
Line speed: 20m/min
Feeding length: Max.9999.99mm
With the Yaskawa Servo Systems and Mitsubishi PLC control, the Compact Feeding line can reach ±0.15mm feeding precision.
Remark:1)The above figures are the material having yield strength σs=245N/mm² ,Max. tensile strength σb=392 N/mm²)
|Uncoiler Straightener feeder 3 in 1|
|Straightener Rolls(piece)||upper 4/down 3|
|Feed Rolls (set)||1||1||1||1||1|
|Power(v)||3 Phase 220V/380V/50HZ|
| || || || || || |
|Material Tech-info of thickness & Width||MFL4-400||MFL4-600||MFL4-800||MFL4-1000||MFL4-1300|
2)Specifications are subject to change for improvement without notice.
Auto Feeder 3 In 1 is suitable for automobile stamping, appliances manufacturing, computer and electronic componets, hardware and metal parts etc industry.Automotive Parts: Bracket, Damper, Barke Pad, Tie Bar, Electric Accessory, Shell Parts Of Printers, Computer Frame,Slide Rail of Car Seat, Splash Shield of car body and etc.
Metal sheets stamping line configuration
Customer's ApplicationCompact decoiler straightener feeder machine is working in customer's factory.